You spent months on this record. Rehearsals, takes, re-takes, mix revisions until the snare finally hit right. The DDP is the last step before all of it gets pressed onto hundreds or thousands of discs, and whatever is on it ends up in your fans’ hands exactly like that. A typo in a song title, a missing ISRC, a two-second hole between the intro and the opener: once it’s pressed, it’s pressed.
Our free DDP player lets you check everything before you sign off. Drop your DDP folder or ZIP into the player below. You’ll hear the master gaplessly, the way the finished CD will play, and see every piece of data the pressing plant will use: track list, pauses, ISRC codes, barcode, CD-Text and checksums. No software to install, no account, no cost.
Nothing gets uploaded. The player runs entirely in your browser, so your unreleased album never leaves your computer. No leaks before release day.
How to check your DDP in three steps
- Drop it in. Drag the DDP folder or the ZIP your mastering engineer sent you onto the player. No unzipping needed. On a phone or tablet, open the ZIP with the button instead.
- Check the data. Go through the track list, pauses, ISRC codes, barcode and CD-Text. The Checks tab verifies the MD5 checksums automatically and flags anything that looks off.
- Listen like a fan. Hit play and listen through the whole record without gaps. Then turn on the transition test to hear every track change back to back, the end of one song straight into the start of the next.
All good? Save the PQ sheet as a PDF and send it to the pressing plant together with the DDP.
Everything the DDP player shows you
- Gapless playback: the complete master including pauses, sample-accurate, exactly as it will play from the CD.
- Track list: start times, lengths, pauses and sub-indices from the PQ data, in CD time.
- Codes and CD-Text: ISRC per track, UPC/EAN barcode, album and track titles, performer, songwriter and composer.
- MD5 check: every file of the DDP is verified against the checksum file automatically.
- Loudness: integrated loudness, loudness range, max. momentary and short-term loudness and sample peak, per track and for the whole album, measured according to EBU R 128.
- Meters: peak meter with peak hold, goniometer and correlation meter.
- Transition test: plays 3 to 15 seconds around every track change, one after another.
- Waveform: the whole record at a glance with track markers. Click anywhere to jump there.
- Export: single tracks or the whole album as WAV, plus a PQ sheet as PDF.
Mistakes the player catches for you
Some errors you won’t hear. The Checks tab looks for the ones that cause trouble at the pressing plant or later in your royalty statements:
- checksums that don’t match, meaning the download was damaged
- ISRC codes that are missing, in the wrong format or used twice
- a barcode with an invalid check digit
- tracks shorter than the 4-second minimum for audio CDs
- a running time too long for an 80-minute CD
- audio data that doesn’t match the PQ lead-out
- tracks that hit digital full scale (0 dBFS)
What’s a DDP, anyway?
DDP stands for Disc Description Protocol. It’s the format pressing plants use to make CDs, and it describes the whole disc down to the last frame: the audio, the exact start of every track, the pauses in between, the ISRC codes, the barcode and the CD-Text.
That’s why a DDP isn’t a single file but a folder with several: DDPID, DDPMS, a PQ descriptor, the audio image and usually CD-Text and a checksum file. The checksums make sure nothing changes on the way from the mastering studio to the plant. What you hear in this player is bit for bit what ends up on the disc.
We master your album for CD, vinyl and streaming and deliver a pressing-ready DDP with CD-Text, ISRC codes and checksums. Heavy, loud and still dynamic. More about our mastering
DDP player FAQ
Why do pressing plants want a DDP instead of WAV files?
WAV files only carry audio. A DDP also carries everything else a CD needs: track starts, pauses, ISRC codes, barcode and CD-Text, plus checksums that prove nothing was damaged in transfer. The plant presses exactly what’s in it, so nobody has to rebuild your track order by hand.
Do my files get uploaded?
No. The player reads your DDP directly in your browser. Nothing is sent to our server or anyone else’s, so unreleased material stays private.
My mastering engineer sent a ZIP. Do I need to unzip it first?
No, drop the ZIP straight into the player. With a very large ZIP, unzipping it first and dropping the folder loads faster and uses less memory.
How do I know my DDP wasn’t damaged during the download?
If the DDP includes a checksum file, and it should, the player compares every file against it automatically. A green result in the Checks tab means the transfer was perfect. If a checksum doesn’t match, ask for the DDP again and don’t send that copy to the plant.
I found a typo in the CD-Text. Can I fix it myself?
Don’t edit the files yourself. Changing anything breaks the checksums and can make the DDP unusable. Send the correction to whoever made the master and ask for a new DDP. If we mastered your record, just let us know.
Can I burn a CD from the player?
No, browsers can’t access a CD burner. You don’t need a burned disc to check a DDP before pressing, though. Listening, the data and the checksum check cover everything that matters.
Can I get the tracks as WAV files?
Yes. Save any track as a WAV file (16-bit, 44.1 kHz) from the track list, or the whole album as one file. Handy for comparing the CD master with your references or sending a track to the band.
Does it work on my phone?
Yes, as long as the DDP is a ZIP file, since phones can’t open folders. For really listening, a computer with good headphones or speakers is still the better choice.
